 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NTE909 & NTE909D Integrated Circuits Operational Amplifier Description: These devices are monolithic operational amplifiers intended for general-purpose applications. Operation is completely specified over the range of voltages commonly used for these devices. The design, in addition to providing high gain, minimizes both offset voltages and bias currents. Further, the class-B output stage gives a large output capability with minimum power drain. External components are used to frequency compensate the amplifier. Although the unity-gain compensation network specified will make the amplifiers unconditionally stable in all feedback configurations, compensation can be tailored to optimize high-frequency performance for any gain setting. The fact that the amplifiers are built on a single silicon chip provides low offset and temperature drift at minimum cost. It also ensures negligble drift due to temperature gradients in the vicinity of the amplifier. Absolute Maximum Ratings: Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18V Power Dissipation (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250mW Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10V Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10V Output Short-Circuit Duration (TA = +25C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 seconds Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65 to +150C Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to +70C Lead Temperature (Soldering, 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +300C Note 1 For operating at elevated temperatures, the device must be derated based on a 100C maximum junction temperature and a thermal resistance 150C/W junction to ambient or 45C/W, junction to case for the metal can package. Electrical Characteristics: (0C TA = +70C, 9V VS 15V, C1 = 5000pF, R1 = 1.5k, C2 = 200pF and R2 = 51 unless otherwise specified) Parameter Input Offset Voltage Input Bias Current Input Offset Current Test Conditions TA = +25C, RS 10k TA = +25C TA = TMIN TA = +25C TA = TMIN TA = TMAX Min - - - - - - Typ 2.0 300 0.36 100 75 125 Max 7.5 1500 2.0 500 400 750 Unit mV nA A nA nA nA Electrical Characteristics (Cont'd): (0C TA = +70C, 9V VS 15V, C1 = 5000pF, R1 = 1.5k, C2 = 200pF and R2 = 51 unless otherwise specified) Parameter Input Resistance Output Resistance Supply Current Transient Response Risetime Transient Response Overshoot Slew Rate Average Temperature Coefficient of Input Offset Voltage Large Signal Voltage Output Voltage Swing Input Voltage Range Common Mode Rejection Ratio Supply Voltage Rejection Ratio TA = +25C RS = 50, TA = +25C to TMAX RS = 50, TA = +25C to TMIN VS = 15V, RL 2k, VOUT = 10V VS = 15V, RL = 10k VS = 15V, RL = 2k VS = 15V RS 10k RS 10k Pin Connection Diagram Test Conditions TA = +25C TA = TMIN TA = +25C TA = +25C, VS = 15V VIN = 20mV, CL 100pF, TA = +25C Min 50 50 - - - - - - - 15 12 10 8 65 - Typ 250 250 150 2.6 0.3 10 0.25 6.0 12 45 14 13 10 90 25 Max - - - 6.6 1.0 30 - - - - - - - - 200 Unit k k mA s % V/s V/C V/C V/mV V V V dB V/V NTE909 (Top View) Output Freq Comp Output 5 6 4 NTE909D V (-) N.C. 1 N.C. 2 Input Freq Comp A 3 Invert Input 4 Non-Invert Input 5 V (-) 6 N.C. 7 14 N.C. 13 N.C. 12 Input Freq Comp B 11 V (+) 10 Output 9 Output Freq Comp 8 N.C. V (+) 7 3 Non-Invert Input Input Freq Comp B 8 1 2 Invert Input Input Freq Comp A .370 (9.39) Dia Max .335 (8.52) Dia Max .177 (4.5) Max .492 (12.5) Min .018 (0.45) Dia Typ 2 1 8 45 7 3 4 5 6 .200 (5.06) Dia .032 (0.82) 14 8 1 7 .785 (19.95) Max .200 (5.08) Max .300 (7.62) .100 (2.45) .600 (15.24) .099 (2.5) Min |
Price & Availability of NTE909D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |